How to Fix Trapped Air in Pipes: Step-by-Step Guide

Learn how to fix trapped air in pipes by safely draining and purging air with this simple step-by-step process.

15 views

To fix trapped air in pipes, first turn off the water at the main supply to prevent any pressure buildup. Then, open the highest faucet in your home to allow the air to begin to escape. Next, proceed to open the lowest faucet (often located in the basement or outside) to drain any remaining water and let the trapped air out. After you've done this, slowly turn the water back on at the main supply. This gradual process allows water to push the air out gently through the faucets you've opened. Remember to close both faucets once there's a steady flow of water, indicating that the air has been purged from the pipes.

FAQs & Answers

  1. Why is there air trapped in my pipes? Air can get trapped in pipes due to installation, repairs, or when water supply is turned off and back on, causing air pockets that disrupt water flow.
  2. What happens if trapped air in pipes isn’t fixed? If not removed, trapped air can cause noisy pipes, inconsistent water pressure, and may eventually damage the plumbing system.
  3. How often should I check for trapped air in pipes? Check for trapped air especially after plumbing work or water system shutdowns, and regularly if you notice sputtering faucets or pressure changes.